Posiflex CR-4000 User Manual download pdf

Part 1

FCC Notes:

This equipment generates, uses, and can radiate radio

frequency energy and, if not installed and used in

accordance with the instructions manual, may cause

interference to radio communications. It has been tested and found to comply with

limits for a Class A digital device pursuant to subpart J of Part 15 of FCC Rules, which

are designed to provide reasonable protection against interference when operated in a

commercial environment. Operation of this equipment in a residential area is likely to

cause interference in which case the user at his own expense will be required to take

whatever measures to correct the interference.

Warranty Limits:

Warranty terminates automatically when any person other than the authorized

technicians opens the machine. The user should consult his/her dealer for the problem

happened. Warranty voids if the user does not follow the instructions in application of

this merchandise. The manufacturer is by no means responsible for any damage or

hazard caused by improper application.

About This Manual:

Posiflex has made every effort for the accuracy of the content in this manual. However,

Posiflex will assume no liability for any technical inaccuracies or editorial or other

errors or omissions contained herein, nor for direct, indirect, incidental, consequential

or otherwise damages, including without limitation loss of data or profits, resulting

from the furnishing, performance, or use of this material.

This information is provided “as is” and Posiflex Technology, Inc. expressly disclaims

any warranties, expressed, implied or statutory, including without limitation implied

warranties of merchantability or fitness for particular purpose, good title and against

infringement.

The information in this manual contains only essential hardware concerns for general

user and is subject to change without notice. Posiflex reserves the right to alter product

designs, layouts or drivers without notification. The system integrator shall provide

applicative notices and arrangement for special options utilizing this product. The user

may find the most up to date information of the hardware from web sites:

http://www.posiflex.com or http://www.posiflex.com.tw

All data should be backed-up prior to the installation of any drive unit or storage

peripheral. Posiflex will not be responsible for any loss of data resulting from the use,

disuse or misuse of this or any other Posiflex product.

All rights are strictly reserved. No part of this documentation may be reproduced,

stored in a retrieval system, or transmitted in any form or by any means, electronic,

mechanical, photocopying, or otherwise, without prior express written consent from

Posiflex Technology, Inc. the publisher of this documentation.

All brand and product names and trademarks are the property of their respective holders.

P/N:

192409010

CR-4000/6000 SERIES

CASH DRAWER

USER’S MANUAL

Rev. B0

1 2 3 4 5 6 7 8 9 10

Summary of Contents

Page 1 - USER’S MANUAL

Part 1 FCC Notes: This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accord

Page 2 - CARTON CONTENTS

Part 10 Tray for CR-4210/ 4211/ 4212/ 4213/ 4214/ 4225/ 4215-II / 6210/ 6214/ 6015/ 6215 Caution : For CR-4015/ CR-4115/ CR-422

Page 3

Part 2 MODEL NUMBERS Model CR400X/4015 CR410X/4115 CR421X/4225/ CR6015/621X Bill Compartment 5 Adjustable 5 Fixed 5 Fixed Bill clip Plastic Metal

Page 4 - INSTALLATION

Part 3 a). For CR4000/4020/4100/4210/6210: The standard signal cable is 21863018010 which has a 8 pin plug at one end to connect to the cash

Page 5

Part 4 INSTALLATION CR4000 / 4020 / 4100 / 4210 / 6210 Connect the drawer to POS system/printer as shown below: CR4001 / 41

Page 6

Part 5 CR4001/ 4101/ 4211/ 4002/ 4102/ 4212/ 4003/ 4103/ 4213 Rear panel illustration. S1 Set security code. (Default Setting:

Page 7 - SPECIFICATIONS

Part 6 3). Connect the DB-9 connector to the computer's serial port of COM1 (or COM2). Connect the 4P phone plug connector to the added I/O br

Page 8 - Keylock

Part 7 2). Connect USB connector of cable coming out from the rear side of the USB interface cash drawer to USB port of main PC. 3). Check the

Page 9 - STRUCTURE

Part 8 DC Power Kit (for CR-4004 / 4104 / 4214 / 6214): +12 V DC and + 5 V DC Interface Direct Drive: CR-4000/ 4020/ 4100/ 4210/ 6210 Serial (RS232C

Page 10

Part 9 STRUCTURE Inside CR-4000/ 4001/ 4002/ 4003/ 4004/ 4005-II/ 4015/ 4100/ 4101/ 4102/ 4103/ 4104/ 4115/ 4105-II Tray for CR-402

Comments to this Manuals

No comments

Posiflex CR-4000 User Manual

Browse online or download User Manual for Cash box trays Posiflex CR-4000. Posiflex CR-4000N cash box tray

Summary of Contents

Comments to this Manuals

Related products and manuals for Cash box trays Posiflex CR-4000