Posiflex KS-6617Z User Manual

Part 1 FCC Notes: This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the

Part 10ROUTING THE CABLES The designed cable routing for all external cable connections referring to the pictures above is to have all the c

Part 11window are designated for VGA port and COM port power supply function. Please consult your dealer for technical support on setup of these jum

Part 12the DC supply in COM port is not required, it will be powered through the USB port. CONNECTING CASH DRAWER (OPTION) The RJ11 connector in mai

Part 13Back side of WB-6000VB Then slide the main unit down to move the pegs into the lower slot part of the holes till it clicks. Note that all the

Part 1415”85.1/89.4T 17”89.8/94.1T Align the four matching pegs on the back of the main unit as circled in the below left picture with the four ma

Part 15For KS systems preloaded with Windows XP Pro or WEPOS on HDD, Posiflex provides recovery CD or DVD delivered with the touch terminal for the

Part 16be powered off for more than few days, please always disconnect the battery from the system. Reconnect it and turn on the system to recharge

Part 17POWER ON/OFF & BRIGHTNESS CONTROL Touch Open Cover A gentle tap on the touch open cover at left side of the main unit will open the cover

Part 18LAN Wake up: Power Management -- Wake-Up by PCI card RING Power Management -- Power On by Ring Time Power

Part 19Advanced Chipset Features On-Chip Frame Buffer Size 8MB(1MB, 4MB, 8MB, 16MB, 32MB) DVMT Mode DVMT (FIXED, DVMT, BOTH) DVMT

Part 2 ALERT TO OUR HONORABLE CUSTOMERS: l Please always read thoroughly all the instructions and documents delivered with the product before you do

Part 20Mouse Emulation The touch panel in KS system uses USB interface as standard. Only the optional InfraRed type touch panel model uses RS232 int

Part 3 INTRODUCTION PRODUCT PICTURES Front Views Side Views Rear Views 7 5 1 3 6 11 8 9 4 2 8 9 12 5 1 3 7 10 6 2

Part 4 Bottom Views PARTS IDENTIFICATION 16. Optional top mount upgrade kit e.g. PD-310 or PD-2604 17. Power

Part 5 PRODUCT FEATURES Standard Features: a) Applicable CPU: 1. for KS-6615 only: Intel Celeron M 1.0 GHz 2. for KS-6615 / 6617: Interl Celeron

Part 6 11. one UPS battery connector m) Touch control functions: left/right button, double click, drag & draw n) Dual display support (per OS

Part 7 INSTALLATION GUIDES CAUTION: Before any installation or cable connection to the set, please always make certain that the system is turned off

Part 8 when disconnecting any connector. Failure to do this could damage the cable and jack that is considered as an artificial destruction. Damag

Part 9 battery cable. The UPS battery will be held in place when the bottom plate is screwed back. As for gen 6 super slim base model, please remove