Part 1 FCC Notes: This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance wit
Part 10 The USB interface model of PD-2601 / 2602 / 2603 should be connected directly to an USB port and must not be through any non-se
Part 11 SPECIFICATION OPTICAL Number of digits 20 digits/row, 2 rows Dot matrix 5 X 7 dots Digit height 9.03 mm Digit width 5.25 mm Display colo
Part 2 BRIEF INTRODUCTION THE PRODUCT The PD-2600 is a stand alone pole mount customer display designed for discrete POS applications.
Part 3 INSTALLATION GUIDES HOST SYSTEM PREPARAION For serial interface (RS232) PD-2601or PD-2602 or PD-2603 to be used in HT or PB or KS or TP
Part 4 3 pin power connector from either 12 V AC or +24 V DC power adaptor to the“12 V DC In” or “+24 V DC In” jack in the connector area
Part 5 INSTALLING PD-2601 Opening the back cover on system For ease of PD-2601 installation operation, the HT main unit or PB system has to be
Part 6 Take PD-2601 out of its box and refer to Pix. 3 that is a picture of the pole display base unit (lowest part of the PD) with 2 enla
Part 7 Please note the importance of keeping the leftward pressure on bottom end of pole display during the process of turning the pole upr
Part 8 Fixing pole display base to system To fix the PD-2602 to base of KS or TP systems, please connect the interface cable of PD-2602 through the
Part 9 Now please check the back of PD-260X display head as in the left picture in Pix. 14. There is a small piece of plastic cover for the “DIP swi
Comments to this Manuals