Posiflex PD-2600 User Manual download pdf (Page 7)

Part 7

Please note the importance of keeping the leftward pressure on bottom end of

pole display during the process of turning the pole upright and inserting the

locating bosses B’ or even when you want to release the locating bosses B’

away from I/O plate B and turn the upper end of pole display to left to remove

the locking lugs A’ from bottom chassis A. Ignorance of this point may

damage or even break off the locking lugs A’ due to improper torque applied.

Apply sidewall screw

The screw bosses of PD-2601 base should

now align with the screw holes on sidewall

of system chassis. Only 1 screw needs to be

applied. Use the self-tapping screw that

comes with PD-2601 to fix from external

side of sidewall as demonstrated in Pix. 6.

Connect interface cable

Carefully close back the top cover of HT or PB system and connect the

interface cable of PD-2601 to appropriate port in system connector area. Then

close the back cover of the system.

INSTALLING PD-2602

Opening the rear connect cover on system

To install PD-2602 to the base of KS or TP systems, the rear connect cover on

its base has to be removed as described in the user’s

manual. The plastic hook

plate to remove the rear

connect cover in slim base is

indicated in Pix. 7 and that for

universal base is indicated in

Pix. 8.

’

Pix. 5

’

B+B

’

Outside of sidewall

PD-2601 Base

Pix. 6

C+C

’

Pix. 8

Pix. 7

1 2 3 4 5 6 7 8 9 10 11

No comments

Posiflex PD-2600 User Manual Page 7